TurboCAD Change Logs

TurboCAD 2017.0 Pro Platinum build 38.2 Change Log

  • Pro: Sometimes when saving a file, the total editing time was reported as a negative value.
  • Pro: The Multi-Add tool was showing unnecessary messages.
  • Pro: A blank page was being created when the user saved a drawing in U3D /PRC PDF format.
  • Pro: Bend by Sketch, followed by Unfold Face, sometimes led to an unhandled exception.
  • Pro: Sometimes an unhandled exception occured after activating Unbend Sheet tool and selecting the facet.
  • Pro: Sometimes an unandled exception occured when the user tried to extrude a face on an SMESH object.
  • Pro: Locking X, Y, or Z from the Modes menu didn't also lock the coordinate in the Inspector Bar, and vice versa.
  • Pro: Some text fields in Advanced Preferences were not fully visible.
  • Pro: After editing an entry inserted in the underlay manager and changing the page type of the same entry, the old page was displayed.
  • Pro: In the Design Director, using the 'Edit Layer Set' tool to change a layer's visibility was not working properly.
  • Pro: The Properties tab ws appearing on the constraints tab when user clicks on the constraints tab for the first time.
  • Pro: An unhandled exception occurred when user tried close the application while a drawing was still being loaded.
  • Pro: Sometimes an unhandled exception could occur after installing Pro Platinum through custom installation and disabling a few items.

TurboCAD 2017.0 Pro Platinum build 33.4 Change Log

  • Pro: Added some 'sanity' checks to input fields of Page Setup Wizard
  • Pro: Compass angle in GeoMark tool wasn't correct.
  • Pro: AutoSave minimum value could be set to zero. Now must be 1 minute or more.
  • Pro: Table cells' text alignment was changing after importing a table.
  • Pro: After AutoSave, the auto-save filename was shown in Summary Info's title field when the user subsequently performed a manual save.
  • Pro: Save Undo option wasn't working for Modify 3D Objects operations -- after reopening the drawing, Undo was not available.
  • Pro: In some specific cases, save as DWG was causing a crash.
  • Pro: The Gear Contour tool was producing incorrect results if the pressure angle was set to 26 or higher.
  • Pro: Copy/Paste via shortcut keys was causing a crash in some cases, where Copy/Paste from the menu did not.
  • Pro: In some cases activating the Center Line or Center Mark tools caused a crash.
  • Pro: Using Zoom To tool in the Selection Info Palette could sometimes cause a crash if the camera was in Perspective View.
  • Pro: Undo was not enabled after inserting an AutoCAD-type Point object.
  • Pro: Image Styles were missing after opening a drawing from TC 2016 containing embedded images.
  • Pro: In some cases an unhandled exception might occur if the user closed TurboCAD while a drawing was being loaded.
  • Pro: Very large Constraint Marker scale values caused zooming problems. Now limited to scale factor of 1000 or less.
  • Pro: Saving files to STL format sometimes caused extreme flickering.
  • Pro: Points could be selected in GDI mode but not in RedSDK mode.
  • Pro: Fixed a potential crash when extruding a selected face.
  • Pro: When zoomed in, text was difficult to select except at the edges of the bounding rectangle.
  • Pro: Double Line showed incorrect length in Selection Info.
  • Pro: Offset tool wasn't working on elliptical arc.
  • Pro: Fixed a possible crash when dimensioning to a center mark.
  • Pro: Fixed some display issues with the Revision Cloud tool.
  • Pro: First use of the Table Import tool allowed an unnamed New Data Link.
  • Pro: Zoom To wasn't working for holes.
  • Pro: Table Export tool was showing wrong properties.
  • Pro: Neither "Finish" nor double-clicking was working with Concentric Arcs tool.

TurboCAD 2017.0 Expert build 32.2 Change Log

  • Expert. Entity Mark tool is not available.
  • Expert: RedSDK Materials can only be edited from the Materials palette.
  • Expert. After uninstalling Symbols plugin, its path in Library path doesn't clear.
  • Expert. Constraints markers are not appearing on closed 2D drawing.
  • Expert. Point cloud feature is not appearing in Expert.

TurboCAD 2017.0 Deluxe build 31.1 Change Log

  • Deluxe. After installing the Boxed/ESD version, asked for activation code before user obtained one.
  • Deluxe. Offsetting an ellipse resulted in an 'improper argument' message.
  • Deluxe. Removed Help/Upgrade from the Help menu.
  • Deluxe. "Server Busy" error sometimes appeared after inserting an object.
  • Deluxe. Editing Text or MultiText in RedSDK mode sometimes caused continuous screen redraws.
  • Deluxe. Neither 'Finish' nor double-clicking ended the Concentric Arcs operation.
  • Deluxe. The Insert/Paperspace submenu was incomplete.
  • Deluxe. 3D Slice command was missing.